6218-ZD
The most widely used bearing series. Versatile, good balance of load capacity and speed. The go-to choice for general-purpose applications.
FAG6218-2ZR
Pricing not yet available for this part.
Specifications
| Bore diameter (d) | 90 mm |
| Outer diameter (D) | 160 mm |
| Width (B) | 30 mm |
| Dynamic load rating (C) | 95.6 kN |
| Static load rating (C₀) | 67 kN |
| Weight | 1620 g |
| Max speed (grease) | 4,800 rpm |
| Max speed (oil) | 6,000 rpm |
Equivalents Across Brands
Internal Clearance
Normal Clearance (CN)
Standard radial internal clearance. Suitable for most applications under normal operating conditions.
Best forGeneral-purpose use. Normal temperatures, standard fits, moderate speeds.
TemperatureUp to ~70°C operating temperature
Seal Type
Metal Shielded (ZZ / 2Z)
Metal shields on both sides. Moderate protection from dust and debris. Pre-lubricated with grease.
Best forModerately clean environments. Applications where some contamination is possible but not severe.
Avoid forHarsh environments with heavy moisture, chemicals, or fine dust ingress.
Examples
- Electric motors
- Fans and blowers
- Power tools
- HVAC equipment
Where This Bearing Is Used
Electric motorsPumps and compressorsConveyor rollersAgricultural machineryAutomotive components (alternators, water pumps, A/C)Washing machines and dryersFans and blowersGearboxesPower transmission equipmentSkateboard and inline skate wheels
ManufacturingAutomotiveAgricultureHVACConsumer goods
Other Variants Available
Same bearing geometry — different seal and clearance configurations.
| SKF Part Number | Seal Type | Clearance |
|---|---|---|
| 6218 | Open (No Seal) | CN |
| 6218 C3 | Open (No Seal) | C3 |
| 6218-2Z | ZZ | CN |
| 6218-2Z C3 | ZZ | C3 |
| 6218-2RS1 | 2RS | CN |
| 6218-2RS1 C3 | 2RS | C3 |