What is the equivalent of a 6218-2Z bearing?

The 6218-2Z is a 90×160×30mm deep groove ball bearing with verified equivalents across multiple brands: NSK 6218ZZ, NTN 6218ZZ, SKF 6218-2Z, Timken 6218-ZZ. All equivalents share the same bore, outer diameter, width, and load ratings.

What are the dimensions of a 6218-2Z bearing?

The 6218-2Z bearing has a bore diameter of 90mm, outer diameter of 160mm, and width of 30mm. It has a dynamic load rating of 95.6 kN, static load rating of 67 kN, and weighs 1620g. Maximum speed with grease lubrication is 4,800 rpm.

Can I replace a FAG 6218-2Z with a NSK equivalent?

Yes. FAG and NSK bearings with the same ISO designation are dimensionally interchangeable. The 6218-2Z (90×160×30mm) can be replaced with the equivalent NSK part number as long as the seal type (ZZ) and clearance class (CN) match. Always verify load ratings and speed limits for your specific application.

6218-2Z

ZZCNDeep Groove Ball BearingVerified matchLight Series

The most widely used bearing series. Versatile, good balance of load capacity and speed. The go-to choice for general-purpose applications.

90 × 160 × 30mm

Cr 95.6 kN / C₀r 67 kN

4,800 rpm (grease)

FAG6218-2ZR

Pricing not yet available for this part.

Match Details

The specifications and details for why this match is correct.

Specifications

Bore diameter (d)	90 mm
Outer diameter (D)	160 mm
Width (B)	30 mm
Dynamic load rating (C)	95.6 kN
Static load rating (C₀)	67 kN
Weight	1620 g
Max speed (grease)	4,800 rpm
Max speed (oil)	6,000 rpm

→ How to read a bearing part number

Get a PDF spec sheet

Save, print, or forward to procurement. We'll email it to you and download immediately.

Why This Match Is Correct

✓Exact dimensional match (bore, OD, width)

✓Load ratings within tolerance

✓Seal type verified via manufacturer tables

✓Speed rating compatible

Cross-References

Every way this part is identified across brands and catalogs.

Tier-1 Brand Equivalents

Brand	Part Number	Seal	Clearance	Status
FAG	6218-2ZR	ZZ	CN	Verified
NSK	6218ZZ	ZZ	CN	Verified
NTN	6218ZZ	ZZ	CN	Verified
SKF	6218-2Z	ZZ	CN	Current
Timken	6218-ZZ	ZZ	CN	Verified

Legacy & Proprietary Numbers

SKF6218-2RS1/C2NSK6218C3ESTEYR6218-2RS1/C3PEER6218-2RLDKOYO62182RSRHP6218-2RSFafnir218KFEDERAL1218FLT6218NMRC218-SNACHI6218.2NSZWZ6218-2RSFederal1218FFNew Departure77218SNR6218NFBC6218SRHOOVER7218MGM6218NNTN6218NRSKC5121197SKF6218-2RS1/C3NSK6218CMSTEYR6218-2Z/C3PEER6218-C3KOYO6218DDRHP6218NFafnir218KDFEDERAL1218FFLT6218NRMRC218-SFF

Show all 74 cross-references

NACHI6218NRZWZ6218NFederal1218SFNew Departure77518SNR6218NRSKF6218-2RSJEMNSK6218DDUSTEYR6218C3PEER6218-ZDKOYO6218NRRHP6218NRFafnir218KDDFEDERAL1218FFFLT6218ZMRC218-SZZNACHI6218ZZWZ6218-ZSKF6218-2Z/C3NSK6218DDUCMSTEYR6218C4PEER6218-ZZDKOYO6218ZRHP6218ZSKF6218-2ZJEMNSK6218MSTEYR6218M1/C4PEER6218-ZZD-C3SKF6218/C3NSK6218NRSTEYR6218NRSKF6218/C3VL0241NSK6218ZSTEYR6218ZSKF6218/C4SKF6218/C4S1SKF6218JEMSKF6218M4/C4SKF6218M/C3VL0241SKF6218M/C3VL0244SKF6218M/C4SKF6218NRSKF6218-ZSKF6218-Z/C3SKF6218-ZJEM

Technical Details & Applications

Specification variations and common equipment types.

Internal Clearance

Normal Clearance (CN)

Standard radial internal clearance. Suitable for most applications under normal operating conditions.

TemperatureUp to ~70°C operating temperature

Seal Type

Metal Shielded (ZZ / 2Z)

Metal shields on both sides. Moderate protection from dust and debris. Pre-lubricated with grease.

Avoid forHarsh environments with heavy moisture, chemicals, or fine dust ingress.

Examples

Electric motors
Fans and blowers
Power tools
HVAC equipment

Where This Bearing Is Used

Electric motorsPumps and compressorsConveyor rollersAgricultural machineryFans and blowersGearboxesPower transmission equipmentWashing machinesPrinting pressesHVACAutomotive alternators and A/C compressors

Alternative Parts

Options if this exact part isn't what you need.

Same Geometry, Different Configuration

SKF Part Number	Seal Type	Clearance
6218	Open (No Seal)	CN
6218 C3	Open (No Seal)	C3
6218-2Z C3	ZZ	C3
6218-2RS1	2RS	CN
6218-2RS1 C3	2RS	C3

Related Bearings

Adjacent sizes and cross-series bearings from our catalog.