7314A-C3E
Heavier load capacity than 7200. Used in gearboxes, electric motors, and industrial equipment requiring axial load support.
FAG7314-B-TVP-C3
Pricing not yet available for this part.
Geometry100%
70 × 150 × 35mm
Sealing100%
Open (no seal)
Load rating100%
Cr 93.6 kN / C₀r 50.4 kN
Speed100%
4,080 rpm (grease)
Specifications
| Bore diameter (d) | 70 mm |
| Outer diameter (D) | 150 mm |
| Width (B) | 35 mm |
| Dynamic load rating (C) | 93.6 kN |
| Static load rating (C₀) | 50.4 kN |
| Weight | 1720 g |
| Max speed (grease) | 4,080 rpm |
| Max speed (oil) | 5,355 rpm |
Why This Match Is Correct
✓Exact dimensional match (bore, OD, width)
✓Load ratings within tolerance
✓Seal type verified via manufacturer tables
✓Speed rating compatible
Equivalents Across Brands
| Brand | Part Number | Seal | Clearance | Status |
|---|---|---|---|---|
| FAG | 7314-B-TVP-C3 | Open | C3 | Verified |
| NSK | 7314A C3E | Open | C3 | Verified |
| NTN | 7314 C3 | Open | C3 | Verified |
| SKF | 7314 BEP C3 | Open | C3 | Verified |
| Timken | 7314 C3 | Open | C3 | Verified |
Internal Clearance
Greater Than Normal (C3)
Increased radial internal clearance. Required when bearings operate at elevated temperatures or with tight shaft fits.
Best forHigh-temperature applications. Tight interference fits. Electric motors with frequent starts/stops.
Temperature70-150°C operating temperature
Seal Type
Open (No Seal)
No seals or shields. Allows external lubrication and cooling. Lowest friction, highest speed capability.
Best forClean environments with external lubrication systems. High-speed applications where heat dissipation matters.
Avoid forDirty, dusty, or wet environments. Applications without planned lubrication maintenance.
Examples
- Machine tool spindles
- Gearboxes with oil bath lubrication
- High-speed precision equipment
Where This Bearing Is Used
GearboxesAutomotive wheel hubsElectric motorsIndustrial pumpsHeavy machineryCompressorsPrinting presses
AutomotiveHeavy industryManufacturingPower transmission
Other Variants Available
Same bearing geometry — different seal and clearance configurations.
| SKF Part Number | Seal Type | Clearance |
|---|---|---|
| 7314 BEP | Open (No Seal) | CN |
| 7314 BEP C3 | Open (No Seal) | C3 |
| 7314 BE-2RZP | 2RS | CN |
| 7314 BE-2RZP C3 | 2RS | C3 |