7202-C3
For combined radial and axial loads. Higher rigidity than deep groove bearings. Machine tool spindles, pumps, automotive wheel hubs.
FAG7202-B-TVP-C3
Pricing not yet available for this part.
Geometry100%
15 × 35 × 11mm
Sealing100%
Open (no seal)
Load rating100%
Cr 7.9 kN / C₀r 4.3 kN
Speed100%
18,000 rpm (grease)
Specifications
| Bore diameter (d) | 15 mm |
| Outer diameter (D) | 35 mm |
| Width (B) | 11 mm |
| Dynamic load rating (C) | 7.9 kN |
| Static load rating (C₀) | 4.3 kN |
| Weight | 43.6 g |
| Max speed (grease) | 18,000 rpm |
| Max speed (oil) | 25,000 rpm |
Why This Match Is Correct
✓Exact dimensional match (bore, OD, width)
✓Load ratings within tolerance
✓Seal type verified via manufacturer tables
✓Speed rating compatible
Equivalents Across Brands
| Brand | Part Number | Seal | Clearance | Status |
|---|---|---|---|---|
| FAG | 7202-B-TVP-C3 | Open | C3 | Verified |
| NSK | 7202A C3E | Open | C3 | Verified |
| NTN | 7202 C3 | Open | C3 | Verified |
| SKF | 7202 BEP C3 | Open | C3 | Verified |
| Timken | 7202 C3 | Open | C3 | Verified |
Internal Clearance
Greater Than Normal (C3)
Increased radial internal clearance. Required when bearings operate at elevated temperatures or with tight shaft fits.
Best forHigh-temperature applications. Tight interference fits. Electric motors with frequent starts/stops.
Temperature70-150°C operating temperature
Seal Type
Open (No Seal)
No seals or shields. Allows external lubrication and cooling. Lowest friction, highest speed capability.
Best forClean environments with external lubrication systems. High-speed applications where heat dissipation matters.
Avoid forDirty, dusty, or wet environments. Applications without planned lubrication maintenance.
Examples
- Machine tool spindles
- Gearboxes with oil bath lubrication
- High-speed precision equipment
Where This Bearing Is Used
Machine tool spindlesPumps and compressorsElectric motorsPrecision equipmentCNC machinesDental handpiecesAutomotive wheel hubsSmall electric motors (fractional HP)Fans and blowersPower tools (drills, grinders)Office equipment (printers, copiers)Household appliancesSkateboards and roller skatesRC vehicles and hobby motors
Precision engineeringMachine toolsAutomotiveMedical devices
Other Variants Available
Same bearing geometry — different seal and clearance configurations.
| SKF Part Number | Seal Type | Clearance |
|---|---|---|
| 7202 BEP | Open (No Seal) | CN |
| 7202 BEP C3 | Open (No Seal) | C3 |
| 7202 BE-2RZP | 2RS | CN |
| 7202 BE-2RZP C3 | 2RS | C3 |