6208LHAP63E
The most widely used bearing series. Versatile, good balance of load capacity and speed. The go-to choice for general-purpose applications.
SKF6208-2RS1 C340 × 80 × 18mm
In stock
$18.93
Partmatch price
- Ships from EU warehouse
- Ships within 2–3 business days
- Order 5+ for 5% off · 10+ for 10% off
Secure checkout
Verified supplier
30-day returns
VisaMastercardAmex
Not ready to buy?
Specifications
| Bore diameter (d) | 40 mm |
| Outer diameter (D) | 80 mm |
| Width (B) | 18 mm |
| Dynamic load rating (C) | 32.5 kN |
| Static load rating (C₀) | 19 kN |
| Weight | 352 g |
| Max speed (grease) | 11,000 rpm |
| Max speed (oil) | 18,000 rpm |
Equivalents Across Brands
| Brand | Part Number | Seal | Clearance | Status |
|---|---|---|---|---|
| SKF | 6208-2RS1 C3 | 2RS | C3 | Probable |
| FAG | 6208-2RSR-C3 | 2RS | C3 | Probable |
| NSK | 6208DDU C3E | 2RS | C3 | Verified |
| NTN | 6208LLU/C3 | 2RS | C3 | Probable |
| Timken | 6208-2RS C3 | 2RS | C3 | Probable |
Internal Clearance
Greater Than Normal (C3)
Increased radial internal clearance. Required when bearings operate at elevated temperatures or with tight shaft fits.
Best forHigh-temperature applications. Tight interference fits. Electric motors with frequent starts/stops.
Temperature70-150°C operating temperature
Seal Type
Rubber Sealed (2RS)
Rubber contact seals on both sides. Superior protection from contaminants. Pre-lubricated, maintenance-free.
Best forDirty, dusty, or wet environments. Applications requiring long maintenance-free operation.
Avoid forVery high-speed applications (seal friction limits top speed). Environments exceeding 110°C.
Examples
- Agricultural machinery
- Conveyor rollers
- Automotive components
- Outdoor equipment
- Washing machines
Where This Bearing Is Used
Electric motorsPumps and compressorsConveyor rollersAgricultural machineryAutomotive components (alternators, water pumps, A/C)Washing machines and dryersFans and blowersGearboxesPower transmission equipmentSkateboard and inline skate wheelsIndustrial electric motors (10-50 HP)Gearboxes and speed reducersHeavy-duty pumpsConveyor systemsMachine tool spindlesAutomotive wheel hubsCentrifugal fansCompressors
ManufacturingAutomotiveAgricultureHVACConsumer goods
Other Variants Available
Same bearing geometry — different seal and clearance configurations.
| SKF Part Number | Seal Type | Clearance |
|---|---|---|
| 6208 | Open (No Seal) | CN |
| 6208 C3 | Open (No Seal) | C3 |
| 6208-2Z | ZZ | CN |
| 6208-2Z C3 | ZZ | C3 |
| 6208-2RS1 | 2RS | CN |
| 6208-2RS1 C3 | 2RS | C3 |