6205-2Z%20C3
The most widely used bearing series. Versatile, good balance of load capacity and speed. The go-to choice for general-purpose applications.
FAG6205-2ZR-C3
Pricing not yet available for this part.
Not ready to buy? Save this part →
Specifications
| Bore diameter (d) | 25 mm |
| Outer diameter (D) | 52 mm |
| Width (B) | 15 mm |
| Dynamic load rating (C) | 14.8 kN |
| Static load rating (C₀) | 7.8 kN |
| Weight | 91 g |
| Max speed (grease) | 18,000 rpm |
| Max speed (oil) | 28,000 rpm |
Equivalents Across Brands
| Brand | Part Number | Seal | Clearance | Status |
|---|---|---|---|---|
| FAG | 6205-2ZR-C3 | ZZ | C3 | Probable |
| NSK | 6205ZZ C3E | ZZ | C3 | Verified |
| NTN | 6205ZZ/C3 | ZZ | C3 | Probable |
| SKF | 6205-2Z C3 | ZZ | C3 | Probable |
| Timken | 6205-ZZ C3 | ZZ | C3 | Probable |
Seal Type
Metal Shielded (ZZ / 2Z)
Metal shields on both sides. Moderate protection from dust and debris. Pre-lubricated with grease.
Best forModerately clean environments. Applications where some contamination is possible but not severe.
Avoid forHarsh environments with heavy moisture, chemicals, or fine dust ingress.
Examples
- Electric motors
- Fans and blowers
- Power tools
- HVAC equipment
Internal Clearance
Greater Than Normal (C3)
Increased radial internal clearance. Required when bearings operate at elevated temperatures or with tight shaft fits.
Best forHigh-temperature applications. Tight interference fits. Electric motors with frequent starts/stops.
Temperature70-150°C operating temperature
Where This Bearing Is Used
Light Series — Common Applications
- Electric motors
- Pumps and compressors
- Conveyor rollers
- Agricultural machinery
- Automotive components (alternators, water pumps, A/C)
- Washing machines and dryers
- Fans and blowers
- Gearboxes
- Power transmission equipment
- Skateboard and inline skate wheels
ManufacturingAutomotiveAgricultureHVACConsumer goods
Medium-Small (25mm bore) — Typical Uses
- General-purpose electric motors (1-10 HP)
- Pumps and compressors
- Automotive alternators and A/C compressors
- Conveyor rollers
- Agricultural machinery
- Washing machines
- Industrial fans
- Printing presses
Other Variants Available
Same bearing geometry — different seal and clearance configurations.
| SKF Part Number | Seal Type | Clearance |
|---|---|---|
| 6205 | Open (No Seal) | CN |
| 6205 C3 | Open (No Seal) | C3 |
| 6205-2Z | ZZ | CN |
| 6205-2Z C3 | ZZ | C3 |
| 6205-2RS1 | 2RS | CN |
| 6205-2RS1 C3 | 2RS | C3 |