6202-2ZJEM
The most widely used bearing series. Versatile, good balance of load capacity and speed. The go-to choice for general-purpose applications.
FAG6202-2ZR-C3
Pricing not yet available for this part.
Specifications
| Bore diameter (d) | 15 mm |
| Outer diameter (D) | 35 mm |
| Width (B) | 11 mm |
| Dynamic load rating (C) | 8.06 kN |
| Static load rating (C₀) | 3.75 kN |
| Weight | 45 g |
| Max speed (grease) | 28,000 rpm |
| Max speed (oil) | 43,000 rpm |
Equivalents Across Brands
| Brand | Part Number | Seal | Clearance | Status |
|---|---|---|---|---|
| FAG | 6202-2ZR-C3 | ZZ | C3 | Probable |
| NSK | 6202ZZ C3E | ZZ | C3 | Verified |
| NTN | 6202ZZ/C3 | ZZ | C3 | Probable |
| SKF | 6202-2Z C3 | ZZ | C3 | Probable |
| Timken | 6202-ZZ C3 | ZZ | C3 | Probable |
Internal Clearance
Greater Than Normal (C3)
Increased radial internal clearance. Required when bearings operate at elevated temperatures or with tight shaft fits.
Best forHigh-temperature applications. Tight interference fits. Electric motors with frequent starts/stops.
Temperature70-150°C operating temperature
Seal Type
Metal Shielded (ZZ / 2Z)
Metal shields on both sides. Moderate protection from dust and debris. Pre-lubricated with grease.
Best forModerately clean environments. Applications where some contamination is possible but not severe.
Avoid forHarsh environments with heavy moisture, chemicals, or fine dust ingress.
Examples
- Electric motors
- Fans and blowers
- Power tools
- HVAC equipment
Where This Bearing Is Used
Electric motorsPumps and compressorsConveyor rollersAgricultural machineryAutomotive components (alternators, water pumps, A/C)Washing machines and dryersFans and blowersGearboxesPower transmission equipmentSkateboard and inline skate wheelsSmall electric motors (fractional HP)Power tools (drills, grinders)Office equipment (printers, copiers)Household appliancesSkateboards and roller skatesRC vehicles and hobby motors
ManufacturingAutomotiveAgricultureHVACConsumer goods
Other Variants Available
Same bearing geometry — different seal and clearance configurations.
| SKF Part Number | Seal Type | Clearance |
|---|---|---|
| 6202 | Open (No Seal) | CN |
| 6202 C3 | Open (No Seal) | C3 |
| 6202-2Z | ZZ | CN |
| 6202-2Z C3 | ZZ | C3 |
| 6202-2RS1 | 2RS | CN |
| 6202-2RS1 C3 | 2RS | C3 |