6015-ZZD-C3
Compact bearings for space-constrained applications. Lower load capacity but higher speed ratings.
FAG6015-2ZR-C3
Pricing not yet available for this part.
Specifications
| Bore diameter (d) | 75 mm |
| Outer diameter (D) | 115 mm |
| Width (B) | 20 mm |
| Dynamic load rating (C) | 39.7 kN |
| Static load rating (C₀) | 32.5 kN |
| Weight | 607 g |
| Max speed (grease) | 7,000 rpm |
| Max speed (oil) | 9,000 rpm |
Equivalents Across Brands
| Brand | Part Number | Seal | Clearance | Status |
|---|---|---|---|---|
| FAG | 6015-2ZR-C3 | ZZ | C3 | Probable |
| NSK | 6015ZZ C3E | ZZ | C3 | Probable |
| NTN | 6015ZZ/C3 | ZZ | C3 | Probable |
| SKF | 6015-2Z C3 | ZZ | C3 | Probable |
| Timken | 6015-ZZ C3 | ZZ | C3 | Probable |
Internal Clearance
Greater Than Normal (C3)
Increased radial internal clearance. Required when bearings operate at elevated temperatures or with tight shaft fits.
Best forHigh-temperature applications. Tight interference fits. Electric motors with frequent starts/stops.
Temperature70-150°C operating temperature
Seal Type
Metal Shielded (ZZ / 2Z)
Metal shields on both sides. Moderate protection from dust and debris. Pre-lubricated with grease.
Best forModerately clean environments. Applications where some contamination is possible but not severe.
Avoid forHarsh environments with heavy moisture, chemicals, or fine dust ingress.
Examples
- Electric motors
- Fans and blowers
- Power tools
- HVAC equipment
Where This Bearing Is Used
Small electric motorsPower toolsHousehold appliancesOffice equipmentSmall pumpsDental and medical instrumentsTextile machinery spindlesSmall fans and blowers
Consumer electronicsMedical devicesLight manufacturingHVAC
Other Variants Available
Same bearing geometry — different seal and clearance configurations.
| SKF Part Number | Seal Type | Clearance |
|---|---|---|
| 6015 | Open (No Seal) | CN |
| 6015 C3 | Open (No Seal) | C3 |
| 6015-2Z | ZZ | CN |
| 6015-2Z C3 | ZZ | C3 |
| 6015-2RS1 | 2RS | CN |
| 6015-2RS1 C3 | 2RS | C3 |