33217-J2-Q-C3
FAG33217-XL C3
Pricing not yet available for this part.
Specifications
| Bore diameter (d) | 85 mm |
| Outer diameter (D) | 150 mm |
| Width (B) | 49 mm |
| Dynamic load rating (C) | 240 kN |
| Static load rating (C₀) | 335 kN |
| Weight | 1900 g |
| Max speed (grease) | 2,820 rpm |
| Max speed (oil) | 3,780 rpm |
Equivalents Across Brands
| Brand | Part Number | Seal | Clearance | Status |
|---|---|---|---|---|
| FAG | 33217-XL C3 | Open | C3 | Probable |
| NSK | HR33217J C3 | Open | C3 | Probable |
| NTN | 4T-33217 C3 | Open | C3 | Probable |
| SKF | 33217 J2/Q C3 | Open | C3 | Probable |
| Timken | 33217 C3 | Open | C3 | Probable |
Internal Clearance
Greater Than Normal (C3)
Increased radial internal clearance. Required when bearings operate at elevated temperatures or with tight shaft fits.
Best forHigh-temperature applications. Tight interference fits. Electric motors with frequent starts/stops.
Temperature70-150°C operating temperature
Seal Type
Open (No Seal)
No seals or shields. Allows external lubrication and cooling. Lowest friction, highest speed capability.
Best forClean environments with external lubrication systems. High-speed applications where heat dissipation matters.
Avoid forDirty, dusty, or wet environments. Applications without planned lubrication maintenance.
Examples
- Machine tool spindles
- Gearboxes with oil bath lubrication
- High-speed precision equipment
Other Variants Available
Same bearing geometry — different seal and clearance configurations.
| SKF Part Number | Seal Type | Clearance |
|---|---|---|
| 33217 J2/Q | Open (No Seal) | CN |
| 33217 J2/Q C3 | Open (No Seal) | C3 |