1304SF
Heavier self-aligning ball bearings with higher load capacity than 1200 series. For applications with significant misalignment and moderate radial loads.
FAG6304-2ZR
Pricing not yet available for this part.
Specifications
| Bore diameter (d) | 20 mm |
| Outer diameter (D) | 52 mm |
| Width (B) | 15 mm |
| Dynamic load rating (C) | 16.8 kN |
| Static load rating (C₀) | 7.8 kN |
| Weight | 139 g |
| Max speed (grease) | 19,000 rpm |
| Max speed (oil) | 13,600 rpm |
Equivalents Across Brands
Internal Clearance
Normal Clearance (CN)
Standard radial internal clearance. Suitable for most applications under normal operating conditions.
Best forGeneral-purpose use. Normal temperatures, standard fits, moderate speeds.
TemperatureUp to ~70°C operating temperature
Seal Type
Metal Shielded (ZZ / 2Z)
Metal shields on both sides. Moderate protection from dust and debris. Pre-lubricated with grease.
Best forModerately clean environments. Applications where some contamination is possible but not severe.
Avoid forHarsh environments with heavy moisture, chemicals, or fine dust ingress.
Examples
- Electric motors
- Fans and blowers
- Power tools
- HVAC equipment
Where This Bearing Is Used
Heavy conveyor systemsMining equipmentVibrating screensAgricultural harvestersLarge fans and blowersBulk material handlingFood processing equipmentGeneral-purpose electric motors (1-10 HP)Pumps and compressorsAutomotive alternators and A/C compressorsConveyor rollersAgricultural machineryWashing machinesIndustrial fansPrinting presses
MiningHeavy industryAgricultureFood processing
Other Variants Available
Same bearing geometry — different seal and clearance configurations.
| SKF Part Number | Seal Type | Clearance |
|---|---|---|
| 1304 ETN9 | Open (No Seal) | CN |
| 1304 ETN9 C3 | Open (No Seal) | C3 |