1300-C3
Heavier self-aligning ball bearings with higher load capacity than 1200 series. For applications with significant misalignment and moderate radial loads.
FAG1300-TVH-C3
Pricing not yet available for this part.
Geometry100%
10 × 36 × 10mm
Sealing100%
Open (no seal)
Load rating100%
Cr 6.6 kN / C₀r 2.2 kN
Speed100%
16,150 rpm (grease)
Specifications
| Bore diameter (d) | 10 mm |
| Outer diameter (D) | 36 mm |
| Width (B) | 10 mm |
| Dynamic load rating (C) | 6.6 kN |
| Static load rating (C₀) | 2.2 kN |
| Weight | 45 g |
| Max speed (grease) | 16,150 rpm |
| Max speed (oil) | 20,400 rpm |
Why This Match Is Correct
✓Exact dimensional match (bore, OD, width)
✓Load ratings within tolerance
✓Seal type verified via manufacturer tables
✓Speed rating compatible
Equivalents Across Brands
| Brand | Part Number | Seal | Clearance | Status |
|---|---|---|---|---|
| FAG | 1300-TVH-C3 | Open | C3 | Verified |
| NSK | 1300 C3 | Open | C3 | Verified |
| NTN | 1300 C3 | Open | C3 | Verified |
| SKF | 1300 ETN9 C3 | Open | C3 | Verified |
| Timken | 1300 C3 | Open | C3 | Verified |
Internal Clearance
Greater Than Normal (C3)
Increased radial internal clearance. Required when bearings operate at elevated temperatures or with tight shaft fits.
Best forHigh-temperature applications. Tight interference fits. Electric motors with frequent starts/stops.
Temperature70-150°C operating temperature
Seal Type
Open (No Seal)
No seals or shields. Allows external lubrication and cooling. Lowest friction, highest speed capability.
Best forClean environments with external lubrication systems. High-speed applications where heat dissipation matters.
Avoid forDirty, dusty, or wet environments. Applications without planned lubrication maintenance.
Examples
- Machine tool spindles
- Gearboxes with oil bath lubrication
- High-speed precision equipment
Where This Bearing Is Used
Heavy conveyor systemsMining equipmentVibrating screensAgricultural harvestersLarge fans and blowersBulk material handlingFood processing equipmentSmall electric motors (fractional HP)Fans and blowersPower tools (drills, grinders)Office equipment (printers, copiers)Household appliancesSkateboards and roller skatesRC vehicles and hobby motors
MiningHeavy industryAgricultureFood processing
Other Variants Available
Same bearing geometry — different seal and clearance configurations.
| SKF Part Number | Seal Type | Clearance |
|---|---|---|
| 1300 ETN9 | Open (No Seal) | CN |
| 1300 ETN9 C3 | Open (No Seal) | C3 |