7208-B-2RS-TVP-C3
For combined radial and axial loads. Higher rigidity than deep groove bearings. Machine tool spindles, pumps, automotive wheel hubs.
FAG7208-B-2RS-TVP-C3
Pricing not yet available for this part.
Geometry100%
40 × 80 × 18mm
Sealing100%
Rubber sealed → 2RS1 / 2RSR / DDU / LLU
Load rating100%
Cr 34.5 kN / C₀r 23.9 kN
Speed100%
8,300 rpm (grease)
Specifications
| Bore diameter (d) | 40 mm |
| Outer diameter (D) | 80 mm |
| Width (B) | 18 mm |
| Dynamic load rating (C) | 34.5 kN |
| Static load rating (C₀) | 23.9 kN |
| Weight | 380 g |
| Max speed (grease) | 8,300 rpm |
| Max speed (oil) | 11,000 rpm |
Why This Match Is Correct
✓Exact dimensional match (bore, OD, width)
✓Load ratings within tolerance
✓Seal type verified via manufacturer tables
✓Speed rating compatible
Equivalents Across Brands
| Brand | Part Number | Seal | Clearance | Status |
|---|---|---|---|---|
| FAG | 7208-B-2RS-TVP-C3 | 2RS | C3 | Current |
| NSK | 7208A-2RS C3E | 2RS | C3 | Verified |
| NTN | 7208-2RS/C3 | 2RS | C3 | Verified |
| SKF | 7208 BE-2RZP C3 | 2RS | C3 | Verified |
| Timken | 7208-2RS C3 | 2RS | C3 | Verified |
Internal Clearance
Greater Than Normal (C3)
Increased radial internal clearance. Required when bearings operate at elevated temperatures or with tight shaft fits.
Best forHigh-temperature applications. Tight interference fits. Electric motors with frequent starts/stops.
Temperature70-150°C operating temperature
Seal Type
Rubber Sealed (2RS)
Rubber contact seals on both sides. Superior protection from contaminants. Pre-lubricated, maintenance-free.
Best forDirty, dusty, or wet environments. Applications requiring long maintenance-free operation.
Avoid forVery high-speed applications (seal friction limits top speed). Environments exceeding 110°C.
Examples
- Agricultural machinery
- Conveyor rollers
- Automotive components
- Outdoor equipment
- Washing machines
Where This Bearing Is Used
Machine tool spindlesPumps and compressorsElectric motorsPrecision equipmentCNC machinesDental handpiecesAutomotive wheel hubsIndustrial electric motors (10-50 HP)Gearboxes and speed reducersHeavy-duty pumpsConveyor systemsCentrifugal fansCompressors
Precision engineeringMachine toolsAutomotiveMedical devices
Other Variants Available
Same bearing geometry — different seal and clearance configurations.
| SKF Part Number | Seal Type | Clearance |
|---|---|---|
| 7208 BEP | Open (No Seal) | CN |
| 7208 BEP C3 | Open (No Seal) | C3 |
| 7208 BE-2RZP | 2RS | CN |
| 7208 BE-2RZP C3 | 2RS | C3 |