6030-2Z%20C3
Compact bearings for space-constrained applications. Lower load capacity but higher speed ratings.
FAG6030-2ZR-C3
Pricing not yet available for this part.
Not ready to buy? Save this part →
Specifications
| Bore diameter (d) | 150 mm |
| Outer diameter (D) | 225 mm |
| Width (B) | 35 mm |
| Dynamic load rating (C) | 114 kN |
| Static load rating (C₀) | 106 kN |
| Weight | 3540 g |
| Max speed (grease) | 3,200 rpm |
| Max speed (oil) | 4,000 rpm |
Equivalents Across Brands
| Brand | Part Number | Seal | Clearance | Status |
|---|---|---|---|---|
| FAG | 6030-2ZR-C3 | ZZ | C3 | Probable |
| NSK | 6030ZZ C3E | ZZ | C3 | Probable |
| NTN | 6030ZZ/C3 | ZZ | C3 | Probable |
| SKF | 6030-2Z C3 | ZZ | C3 | Probable |
| Timken | 6030-ZZ C3 | ZZ | C3 | Probable |
Seal Type
Metal Shielded (ZZ / 2Z)
Metal shields on both sides. Moderate protection from dust and debris. Pre-lubricated with grease.
Best forModerately clean environments. Applications where some contamination is possible but not severe.
Avoid forHarsh environments with heavy moisture, chemicals, or fine dust ingress.
Examples
- Electric motors
- Fans and blowers
- Power tools
- HVAC equipment
Internal Clearance
Greater Than Normal (C3)
Increased radial internal clearance. Required when bearings operate at elevated temperatures or with tight shaft fits.
Best forHigh-temperature applications. Tight interference fits. Electric motors with frequent starts/stops.
Temperature70-150°C operating temperature
Where This Bearing Is Used
Extra Light Series — Common Applications
- Small electric motors
- Power tools
- Household appliances
- Office equipment
- Small pumps
- Dental and medical instruments
- Textile machinery spindles
- Small fans and blowers
Consumer electronicsMedical devicesLight manufacturingHVAC
Other Variants Available
Same bearing geometry — different seal and clearance configurations.
| SKF Part Number | Seal Type | Clearance |
|---|---|---|
| 6030 | Open (No Seal) | CN |
| 6030 C3 | Open (No Seal) | C3 |
| 6030-2Z | ZZ | CN |
| 6030-2Z C3 | ZZ | C3 |
| 6030-2RS1 | 2RS | CN |
| 6030-2RS1 C3 | 2RS | C3 |