6000-2Z%20C3
Compact bearings for space-constrained applications. Lower load capacity but higher speed ratings.
SKF6000-2Z C310 × 26 × 8mm
In stock
$4.49
Partmatch price
Order 5+ for 5% off · 10+ for 10% off
+ $9.99 shipping · Ships within 2–3 business days
Free returns within 30 days · Ships from EU warehouse
Secure checkout
Verified supplier
30-day returns
VisaMastercardAmex
Not ready to buy? Save this part →
Specifications
| Bore diameter (d) | 10 mm |
| Outer diameter (D) | 26 mm |
| Width (B) | 8 mm |
| Dynamic load rating (C) | 4.75 kN |
| Static load rating (C₀) | 1.96 kN |
| Weight | 17.8 g |
| Max speed (grease) | 40,000 rpm |
| Max speed (oil) | 67,000 rpm |
Equivalents Across Brands
| Brand | Part Number | Seal | Clearance | Status |
|---|---|---|---|---|
| SKF | 6000-2Z C3 | ZZ | C3 | Probable |
| FAG | 6000-2ZR-C3 | ZZ | C3 | Probable |
| NSK | 6000ZZ C3E | ZZ | C3 | Verified |
| NTN | 6000ZZ/C3 | ZZ | C3 | Probable |
| Timken | 6000-ZZ C3 | ZZ | C3 | Probable |
Seal Type
Metal Shielded (ZZ / 2Z)
Metal shields on both sides. Moderate protection from dust and debris. Pre-lubricated with grease.
Best forModerately clean environments. Applications where some contamination is possible but not severe.
Avoid forHarsh environments with heavy moisture, chemicals, or fine dust ingress.
Examples
- Electric motors
- Fans and blowers
- Power tools
- HVAC equipment
Internal Clearance
Greater Than Normal (C3)
Increased radial internal clearance. Required when bearings operate at elevated temperatures or with tight shaft fits.
Best forHigh-temperature applications. Tight interference fits. Electric motors with frequent starts/stops.
Temperature70-150°C operating temperature
Where This Bearing Is Used
Extra Light Series — Common Applications
- Small electric motors
- Power tools
- Household appliances
- Office equipment
- Small pumps
- Dental and medical instruments
- Textile machinery spindles
- Small fans and blowers
Consumer electronicsMedical devicesLight manufacturingHVAC
Miniature / Small (10mm bore) — Typical Uses
- Small electric motors (fractional HP)
- Fans and blowers
- Power tools (drills, grinders)
- Office equipment (printers, copiers)
- Household appliances
- Skateboards and roller skates
- RC vehicles and hobby motors
Other Variants Available
Same bearing geometry — different seal and clearance configurations.
| SKF Part Number | Seal Type | Clearance |
|---|---|---|
| 6000 | Open (No Seal) | CN |
| 6000 C3 | Open (No Seal) | C3 |
| 6000-2Z | ZZ | CN |
| 6000-2Z C3 | ZZ | C3 |
| 6000-2RS1 | 2RS | CN |
| 6000-2RS1 C3 | 2RS | C3 |