1217-TVH-C3
Double row self-aligning ball bearings that compensate for shaft deflection and housing misalignment up to 2-3°. Light series with same bore dimensions as 6200.
FAG1207-TVH-C3
Pricing not yet available for this part.
Specifications
| Bore diameter (d) | 35 mm |
| Outer diameter (D) | 72 mm |
| Width (B) | 17 mm |
| Dynamic load rating (C) | 19 kN |
| Static load rating (C₀) | 8.5 kN |
| Weight | 280 g |
| Max speed (grease) | 8,500 rpm |
| Max speed (oil) | — |
Equivalents Across Brands
| Brand | Part Number | Seal | Clearance | Status |
|---|---|---|---|---|
| FAG | 1207-TVH-C3 | Open | C3 | Probable |
| NSK | 1207 C3 | Open | C3 | Probable |
| NTN | 1207 C3 | Open | C3 | Probable |
| SKF | 1207 ETN9 C3 | Open | C3 | Probable |
| Timken | 1207 C3 | Open | C3 | Probable |
Internal Clearance
Greater Than Normal (C3)
Increased radial internal clearance. Required when bearings operate at elevated temperatures or with tight shaft fits.
Best forHigh-temperature applications. Tight interference fits. Electric motors with frequent starts/stops.
Temperature70-150°C operating temperature
Seal Type
Open (No Seal)
No seals or shields. Allows external lubrication and cooling. Lowest friction, highest speed capability.
Best forClean environments with external lubrication systems. High-speed applications where heat dissipation matters.
Avoid forDirty, dusty, or wet environments. Applications without planned lubrication maintenance.
Examples
- Machine tool spindles
- Gearboxes with oil bath lubrication
- High-speed precision equipment
Where This Bearing Is Used
Textile machineryConveyor rollersAgricultural equipmentFans and blowersPumps with flexible couplingsWoodworking machineryPrinting pressesIndustrial electric motors (10-50 HP)Gearboxes and speed reducersHeavy-duty pumpsConveyor systemsMachine tool spindlesAutomotive wheel hubsCentrifugal fansCompressors
TextileAgricultureMaterial handlingPaper & pulp