SPC111040 V-Belt — Brand Comparison
Compare the SPC111040 V-belt across Gates, Continental, Optibelt, Dayco, and Bando.
Verification
Why Belt Part Numbers Are the Same Across Brands
Unlike bearings (where SKF uses “2RS1” and NSK uses “DDU” for the same seal type), V-belt manufacturers all use the same industry-standard naming system. An A68 from Gates is the same dimensions as an A68 from Continental, Optibelt, Dayco, or Bando.
The letter designates the cross-section profile (A, B, C for classical; 3V, 5V for narrow) and the number designates the length. This standardization is based on RMA/MPTA and ISO standards that all manufacturers follow.
The differences between brands are in rubber compound, cord construction, and manufacturing quality — which affect belt life and performance under extreme conditions. For standard applications, all brands are fully interchangeable.
Get a PDF cross-reference table
Take this comparison with you. We'll email it and download it now.
Frequently Asked Questions
Can I replace a Gates SPC111040 with a Dayco SPC111040?
Yes. Both are manufactured to the same industry-standard dimensions. They are direct drop-in replacements for each other.
Which brand of SPC111040 belt is best?
Gates is generally considered the premium brand for industrial V-belts. Continental and Optibelt are also high-quality European manufacturers. Dayco is strong in automotive applications. Bando is popular in Asia. For standard applications, any brand will perform well.
What's the difference between SPC111040 and SPCX111040?
The “X” suffix (e.g., AX68 vs A68) indicates a notched/cogged construction. Notched belts run cooler and are more flexible, allowing use on smaller pulleys. Same length and width — different internal construction.