NU2206ECP/C3
Single row cylindrical roller bearings with ribs on the outer ring only. NU-type allows free axial float in both directions, making it ideal as the non-locating bearing in a pair. Same envelope as 6200 deep groove but with ~2x radial load capacity.
FAGNU206-E-TVP2-C3
Pricing not yet available for this part.
Geometry100%
30 × 62 × 16mm
Sealing100%
Open (no seal)
Load rating100%
Cr 39 kN / C₀r 37.5 kN
Speed100%
8,500 rpm (grease)
Specifications
| Bore diameter (d) | 30 mm |
| Outer diameter (D) | 62 mm |
| Width (B) | 16 mm |
| Dynamic load rating (C) | 39 kN |
| Static load rating (C₀) | 37.5 kN |
| Weight | 203 g |
| Max speed (grease) | 8,500 rpm |
| Max speed (oil) | — |
Equivalents Across Brands
| Brand | Part Number | Seal | Clearance | Status |
|---|---|---|---|---|
| FAG | NU206-E-TVP2-C3 | Open | C3 | Probable |
| NSK | NU206W C3 | Open | C3 | Probable |
| NTN | NU206ET2 C3 | Open | C3 | Probable |
| SKF | NU 206 ECP/C3 | Open | C3 | Probable |
| Timken | NU206EM/C3 | Open | C3 | Probable |
Internal Clearance
Greater Than Normal (C3)
Increased radial internal clearance. Required when bearings operate at elevated temperatures or with tight shaft fits.
Best forHigh-temperature applications. Tight interference fits. Electric motors with frequent starts/stops.
Temperature70-150°C operating temperature
Seal Type
Open (No Seal)
No seals or shields. Allows external lubrication and cooling. Lowest friction, highest speed capability.
Best forClean environments with external lubrication systems. High-speed applications where heat dissipation matters.
Avoid forDirty, dusty, or wet environments. Applications without planned lubrication maintenance.
Examples
- Machine tool spindles
- Gearboxes with oil bath lubrication
- High-speed precision equipment
Where This Bearing Is Used
Electric motors (non-drive end)Pumps and compressorsGearboxesFans and blowersMachine tool spindlesRolling mill equipmentConveyor rollersGeneral-purpose electric motors (1-10 HP)Automotive alternators and A/C compressorsAgricultural machineryWashing machinesIndustrial fansPrinting presses
Electric motorsPumpsMachine toolsHeavy industry