NJ2208ECP/C3
Single row cylindrical roller bearings with ribs on the outer ring and one rib on the inner ring. NJ-type provides axial restraint in one direction, suitable as a semi-locating bearing. Same dimensions as NU200 series.
FAGNJ208-E-TVP2-C3
Pricing not yet available for this part.
Geometry100%
40 × 80 × 18mm
Sealing100%
Open (no seal)
Load rating100%
Cr 43.5 kN / C₀r 43 kN
Speed100%
6,700 rpm (grease)
Specifications
| Bore diameter (d) | 40 mm |
| Outer diameter (D) | 80 mm |
| Width (B) | 18 mm |
| Dynamic load rating (C) | 43.5 kN |
| Static load rating (C₀) | 43 kN |
| Weight | 375 g |
| Max speed (grease) | 6,700 rpm |
| Max speed (oil) | — |
Equivalents Across Brands
| Brand | Part Number | Seal | Clearance | Status |
|---|---|---|---|---|
| FAG | NJ208-E-TVP2-C3 | Open | C3 | Probable |
| NSK | NJ208W C3 | Open | C3 | Probable |
| NTN | NJ208ET2 C3 | Open | C3 | Probable |
| SKF | NJ 208 ECP/C3 | Open | C3 | Probable |
| Timken | NJ208EM/C3 | Open | C3 | Probable |
Internal Clearance
Greater Than Normal (C3)
Increased radial internal clearance. Required when bearings operate at elevated temperatures or with tight shaft fits.
Best forHigh-temperature applications. Tight interference fits. Electric motors with frequent starts/stops.
Temperature70-150°C operating temperature
Seal Type
Open (No Seal)
No seals or shields. Allows external lubrication and cooling. Lowest friction, highest speed capability.
Best forClean environments with external lubrication systems. High-speed applications where heat dissipation matters.
Avoid forDirty, dusty, or wet environments. Applications without planned lubrication maintenance.
Examples
- Machine tool spindles
- Gearboxes with oil bath lubrication
- High-speed precision equipment
Where This Bearing Is Used
Electric motors (drive end)Pumps and compressorsGearbox input shaftsIndustrial fansConveyor drivesTraction motorsPaper mill equipmentIndustrial electric motors (10-50 HP)Gearboxes and speed reducersHeavy-duty pumpsConveyor systemsMachine tool spindlesAutomotive wheel hubsCentrifugal fansCompressors
Electric motorsPumpsPower transmissionPaper & pulp