NJ205ECP/C3
Single row cylindrical roller bearings with ribs on the outer ring and one rib on the inner ring. NJ-type provides axial restraint in one direction, suitable as a semi-locating bearing. Same dimensions as NU200 series.
FAGNJ205-E-TVP2-C3
Pricing not yet available for this part.
Geometry100%
25 × 52 × 15mm
Sealing100%
Open (no seal)
Load rating100%
Cr 29.3 kN / C₀r 27.7 kN
Speed100%
10,000 rpm (grease)
Specifications
| Bore diameter (d) | 25 mm |
| Outer diameter (D) | 52 mm |
| Width (B) | 15 mm |
| Dynamic load rating (C) | 29.3 kN |
| Static load rating (C₀) | 27.7 kN |
| Weight | 130 g |
| Max speed (grease) | 10,000 rpm |
| Max speed (oil) | 13,000 rpm |
Why This Match Is Correct
✓Exact dimensional match (bore, OD, width)
✓Load ratings within tolerance
✓Seal type verified via manufacturer tables
✓Speed rating compatible
Equivalents Across Brands
| Brand | Part Number | Seal | Clearance | Status |
|---|---|---|---|---|
| FAG | NJ205-E-TVP2-C3 | Open | C3 | Verified |
| NSK | NJ205W C3 | Open | C3 | Verified |
| NTN | NJ205ET2 C3 | Open | C3 | Verified |
| SKF | NJ 205 ECP/C3 | Open | C3 | Verified |
| Timken | NJ205EM/C3 | Open | C3 | Verified |
Internal Clearance
Greater Than Normal (C3)
Increased radial internal clearance. Required when bearings operate at elevated temperatures or with tight shaft fits.
Best forHigh-temperature applications. Tight interference fits. Electric motors with frequent starts/stops.
Temperature70-150°C operating temperature
Seal Type
Open (No Seal)
No seals or shields. Allows external lubrication and cooling. Lowest friction, highest speed capability.
Best forClean environments with external lubrication systems. High-speed applications where heat dissipation matters.
Avoid forDirty, dusty, or wet environments. Applications without planned lubrication maintenance.
Examples
- Machine tool spindles
- Gearboxes with oil bath lubrication
- High-speed precision equipment
Where This Bearing Is Used
Electric motors (drive end)Pumps and compressorsGearbox input shaftsIndustrial fansConveyor drivesTraction motorsPaper mill equipmentGeneral-purpose electric motors (1-10 HP)Automotive alternators and A/C compressorsConveyor rollersAgricultural machineryWashing machinesPrinting presses
Electric motorsPumpsPower transmissionPaper & pulp
Other Variants Available
Same bearing geometry — different seal and clearance configurations.
| SKF Part Number | Seal Type | Clearance |
|---|---|---|
| NJ 205 ECP | Open (No Seal) | CN |
| NJ 205 ECP/C3 | Open (No Seal) | C3 |