22318E/C3
Medium cross-section spherical roller bearings with higher load capacity than 22200 series for the same bore. Larger OD and greater width provide significantly more radial capacity. Standard sizes start at 22308 (40mm bore).
FAG22308-E1-XL-C3
Pricing not yet available for this part.
Specifications
| Bore diameter (d) | 40 mm |
| Outer diameter (D) | 90 mm |
| Width (B) | 33 mm |
| Dynamic load rating (C) | 155 kN |
| Static load rating (C₀) | 140 kN |
| Weight | 1000 g |
| Max speed (grease) | 6,000 rpm |
| Max speed (oil) | — |
Equivalents Across Brands
| Brand | Part Number | Seal | Clearance | Status |
|---|---|---|---|---|
| FAG | 22308-E1-XL-C3 | Open | C3 | Probable |
| NSK | 22308EAE4 C3 | Open | C3 | Probable |
| NTN | 22308EMD1 C3 | Open | C3 | Probable |
| SKF | 22308 E/C3 | Open | C3 | Probable |
| Timken | 22308EM/C3 | Open | C3 | Probable |
Internal Clearance
Greater Than Normal (C3)
Increased radial internal clearance. Required when bearings operate at elevated temperatures or with tight shaft fits.
Best forHigh-temperature applications. Tight interference fits. Electric motors with frequent starts/stops.
Temperature70-150°C operating temperature
Seal Type
Open (No Seal)
No seals or shields. Allows external lubrication and cooling. Lowest friction, highest speed capability.
Best forClean environments with external lubrication systems. High-speed applications where heat dissipation matters.
Avoid forDirty, dusty, or wet environments. Applications without planned lubrication maintenance.
Examples
- Machine tool spindles
- Gearboxes with oil bath lubrication
- High-speed precision equipment
Where This Bearing Is Used
Heavy gearboxesContinuous casting machinesRolling millsMarine propulsionCrusher equipmentLarge industrial fansOffshore drilling equipmentIndustrial electric motors (10-50 HP)Gearboxes and speed reducersHeavy-duty pumpsConveyor systemsMachine tool spindlesAutomotive wheel hubsCentrifugal fansCompressors
SteelMarineMiningOil & gas