22213E/C3
Double row self-aligning roller bearings with barrel-shaped rollers on a concave spherical outer raceway. Handles very high radial loads and moderate axial loads with up to 2° misalignment. Wider than deep groove bearings for the same bore and OD.
FAG22210-E1-XL-C3
Pricing not yet available for this part.
Specifications
| Bore diameter (d) | 50 mm |
| Outer diameter (D) | 90 mm |
| Width (B) | 23 mm |
| Dynamic load rating (C) | 107 kN |
| Static load rating (C₀) | 108 kN |
| Weight | 620 g |
| Max speed (grease) | 7,000 rpm |
| Max speed (oil) | — |
Equivalents Across Brands
| Brand | Part Number | Seal | Clearance | Status |
|---|---|---|---|---|
| FAG | 22210-E1-XL-C3 | Open | C3 | Probable |
| NSK | 22210EAE4 C3 | Open | C3 | Probable |
| NTN | 22210EMD1 C3 | Open | C3 | Probable |
| SKF | 22210 E/C3 | Open | C3 | Probable |
| Timken | 22210EM/C3 | Open | C3 | Probable |
Internal Clearance
Greater Than Normal (C3)
Increased radial internal clearance. Required when bearings operate at elevated temperatures or with tight shaft fits.
Best forHigh-temperature applications. Tight interference fits. Electric motors with frequent starts/stops.
Temperature70-150°C operating temperature
Seal Type
Open (No Seal)
No seals or shields. Allows external lubrication and cooling. Lowest friction, highest speed capability.
Best forClean environments with external lubrication systems. High-speed applications where heat dissipation matters.
Avoid forDirty, dusty, or wet environments. Applications without planned lubrication maintenance.
Examples
- Machine tool spindles
- Gearboxes with oil bath lubrication
- High-speed precision equipment
Where This Bearing Is Used
Electric motorsPaper mill rollsFans and blowersWind turbine gearboxesMining conveyorsVibrating screensPumps and compressorsLarge electric motors (50+ HP)Industrial gearboxesHeavy-duty conveyor systemsMining and construction equipmentPaper mill machinerySteel rolling millsLarge compressorsWind turbine components
Paper & pulpMiningWind energyHeavy industry