1313-TVH-C3
Heavier self-aligning ball bearings with higher load capacity than 1200 series. For applications with significant misalignment and moderate radial loads.
FAG1303-TVH-C3
Pricing not yet available for this part.
Specifications
| Bore diameter (d) | 17 mm |
| Outer diameter (D) | 48 mm |
| Width (B) | 14 mm |
| Dynamic load rating (C) | 9.9 kN |
| Static load rating (C₀) | 3.8 kN |
| Weight | 95 g |
| Max speed (grease) | 11,900 rpm |
| Max speed (oil) | — |
Equivalents Across Brands
| Brand | Part Number | Seal | Clearance | Status |
|---|---|---|---|---|
| FAG | 1303-TVH-C3 | Open | C3 | Probable |
| NSK | 1303 C3 | Open | C3 | Probable |
| NTN | 1303 C3 | Open | C3 | Probable |
| SKF | 1303 ETN9 C3 | Open | C3 | Probable |
| Timken | 1303 C3 | Open | C3 | Probable |
Internal Clearance
Greater Than Normal (C3)
Increased radial internal clearance. Required when bearings operate at elevated temperatures or with tight shaft fits.
Best forHigh-temperature applications. Tight interference fits. Electric motors with frequent starts/stops.
Temperature70-150°C operating temperature
Seal Type
Open (No Seal)
No seals or shields. Allows external lubrication and cooling. Lowest friction, highest speed capability.
Best forClean environments with external lubrication systems. High-speed applications where heat dissipation matters.
Avoid forDirty, dusty, or wet environments. Applications without planned lubrication maintenance.
Examples
- Machine tool spindles
- Gearboxes with oil bath lubrication
- High-speed precision equipment
Where This Bearing Is Used
Heavy conveyor systemsMining equipmentVibrating screensAgricultural harvestersLarge fans and blowersBulk material handlingFood processing equipmentSmall electric motors (fractional HP)Fans and blowersPower tools (drills, grinders)Office equipment (printers, copiers)Household appliancesSkateboards and roller skatesRC vehicles and hobby motors
MiningHeavy industryAgricultureFood processing